Free Newsletter!  Fast HSW  Suggestions!  About HSW  Contact Us  Home
 Daily Stuff  Top 40  What's New  HSW Store  Forums  Advertise!
    

Click here to go back to the normal view!

Inside a Smoke Detector
by Marshall Brain

You probably have a couple of smoke detectors in your house. In this edition of How Stuff Works we will take one apart and see what's inside! See also the article on smoke detectors to understand how smoke detectors work. Here is the smoke detector we will be exploring today:

When you take off the cover you find that a smoke detector is pretty simple. This one consists of a printed circuit board (see the article Inside a Remote Control for an explanation of printed circuit boards), an ionization chamber (the silver cylinder toward the top right in the following picture) and an electronic horn (the brass cylinder toward the bottom right in the following picture):

Here is a close-up of the board:

and the underside of the board:

Ionization chamber

The ionization chamber is an aluminum can containing the ionization source. You can see that the can has slots in it to allow air flow. The can itself acts as the negative plate of the ionization chamber.

Underneath the can is a ceramic holder that contains the positive plate of the ionization chamber. Under that plate is the ionization source, WHICH YOU WANT TO BE SURE TO NOT DISTURB.

 

Join HSW! |  Newsletter |  Suggestions |  Link to HSW |  Hiring |  Store
About Us |  Contact Us |  Privacy |  Home |  Frequently Asked Questions
Fast HSW |  Advertising | 

Copyright 1998-2003 Howstuffworks, Inc. All rights reserved