Free Newsletter! • Fast HSW • Suggestions! • About HSW • Contact Us • Home
 Daily Stuff • Top 40 • What's New • HSW Store • Forums • Advertise! • Affiliate
 Body & Health
 Cool Stuff
 Science & Tech
 Society & Culture
 Toys & Games

Get Stuff!
Question of the Day
››Tell a friend about this question!

Each weekday, the HowStuffWorks Staff answers questions in the Question of the Day section of HowStuffWorks. The Question Archive lets you view hundreds of questions and answers. Click here to ask a question. Here is today's question!


This may sound silly, but on the back of my car there is a little sign that says "2.4 liter," and every morning I see that and wonder "What does that mean?" So what does it mean?


If you have read How Car Engines Work, you know that your engine has pistons, and the pistons move up and down in their cylinders:

When the piston moves from top to bottom, it sucks in a certain amount of air. How much air it can suck in depends on how big around the piston is, and how far it moves when it goes from top to bottom.

Let's say that the piston in your car is 4 inches (10.16 centimeters) in diameter (also known as the bore), and it moves 4 inches from top to bottom (also known as the stroke). That means that one piston in your engine can suck in:

radius ^ 2 * pi * height = volume of a cylinder

5.08 cm (bore/2) ^ 2 * 3.14 * 10.16 cm (stroke) = 823.3 cubic centimeters

If your car has 4 cylinders, then it has a has a total displacement of:

4 * 823.3 cubic centimeters = 3,292.1 cubic centimeters, or 3.292 liters

A car manufacturer would round that up and say that your car has a 3.3-liter engine. This means that the displacement of this particular engine is 3.3 liters. If you were to turn the crankshaft of this engine through two complete revolutions, the four pistons would inhale a total of 3.3 liters of air.

So why should you care, and why is there a sticker on the back of many cars telling you the engine's displacement? The displacement of the engine gives you some estimate of the maximum power that the engine can produce.

When you mix gasoline with air and burn it in an engine, you can only mix in so much gasoline. The amount of gasoline is limited by the amount of oxygen -- if you mixed in more gasoline, it would not matter because there would be no oxygen in the cylinder to burn it. The ratio is about 15 to 1 -- that's 15 parts air to one part gasoline, by weight. The displacement tells you the maximum amount of gasoline the engine can burn, and this controls the maximum power the engine can produce.

Of course, it is possible to create a 10-liter engine that has really bad performance. And it is also possible to create a 1-liter engine that is highly tweaked to give absolutely the best performance possible from the gasoline it receives. And these two engines could have the same horsepower rating even though one has 10 times more displacement than the other. As a general rule, though, a 10-liter engine should generate 10 times more power than a 1-liter engine if everything else is equal.

Here are several interesting links:

<< Prev Question    Next Question >>

  HSW Home


How did you like today's question?
Fantastic - I will recommend it to others
Very good - I learned a lot
Not so hot - I didn't get much out of it
Bad - this did nothing for me

Do you have any comments?

Sponsored By:

Join HSW! |  Newsletter |  Suggestions |  Link to HSW |  Hiring |  Store
About Us |  Contact Us |  Privacy |  Home |  Frequently Asked Questions
Fast HSW |  Advertising |  Affiliate

Copyright © 1998-2003 Howstuffworks, Inc. All rights reserved